Well, I guess this may be true when the glow plug light lamp on the dash is gone. But your glow plugs are still working fine so the start is not affected, you just cannot see the glow plug light. You can do a simple lamp test to see whether the plug light lamp is okay. Budding Enthusiast. 10. Name: Dave. Ford Model: Titanium. Ford Year: 2010. UK/Ireland Location: Essex. Author. Posted May 19, 2018. It comes up engine management in the centre display with an option to press OK which then goes from the display screen but the " i " light stays on.. Posted: May 29, 2010. 3. responses. When lights switched on engine mis-fires runs rough. car runs fine but when headlights switched on car runs rough and will not pick up revs problem not too bad if only side lights only on. 2003 1.8 petrol manual. Posted: Mar 16, 2011. How do i program my ford key fob 2 my transit van. 1 - Unlock the doors. Put the key in the ignition, and turn from "Off" to "ACC" 8 (eight) times in under 10 seconds. The doors will lock. Leave key in the "ON" position. 2 - Program the fobs by pressing any key on the fob. The doors locks will lock/unlock. The most common causes for flickering dashboard lights and no engine crank in Ford Mondeo are weak battery, corrosion on battery terminals, and bad ground connection. 1. Weak battery. The leading cause of flickering dashboard lights and no start in Ford Mondeo is weak battery. You may also hear rapid clicking noise when you try to start the engine. If the Ford instrument cluster is not working it can easily be repaired with SEPDISP59 and SEI-DISP126 because the LCD display press-fits into the connector on the instrument cluster board present on the following car models: Ford C-Max 2nd gen (models from 2011 to 2019); Ford Focus 3rd gen Mk3 (models from 2011 to 2018); Airbag Warning Dashboard Light. Hi, just wondering did anyone have a problem with their airbag warning light on MK4 Mondeo. I took it into a Ford dealership a few months ago and one of the mechanics said that there was a problem with the module underneath the driver seat. He said he took it out and "reconditioned it" and has been ok since until Posted November 24, 2017. Ah ok, on the Mk3 Focus, to the right of the large headlight knob there are a couple of buttons with a dash clock picture and + & - symbols. These adjust the dash brightness, they can be a bit slow though so press once then wait a second or so and it should brighten a bit after each press. .

ford mondeo dashboard lights not working